I am just testing out my new 300D ~ just wondering - what did you set the AV to be when you took Adrian's signature files? Don't know how to get this PV thing to work.... thanks
Congratulation! Welcome to the DSLR world! I set to F2.8 or F3.5 when I took Adrian's pictures.
BTW, which LENS are you using?
If you want to try the effect, I can borrow my 50mm F1.4 to you. (If you use it, you can set to F1.4, F2.0, F2.8 or F3.5 whatever)
One of the important things when you use your camera...I generally set my DSLR to use the center focus point only.
I remember that you should need to fine tune your camera if you're using 300D... I can't remember exactly is it related to flash or other issue... Maybe other dada like dom/mcben can give you an idea on this. BTW, you can check the following 300D FAQ.
One of the issue of 300D is photo will under when using internal/external flash. and 300D got no flash compensation (FEC)
For internal flash or external flash without FEC(eg 420ex), you can use connect the 300D to your PC, using a program to change it (usually +1/3~2/3), then you can keep this value at your 300D. If you need this program, I can send it to you.
If you use Sigma Super 500G or Canon 550Ex, they both got FEC, then it is no longer an issue.
Another potential problem is front-focus, next week I shall take back my 300D, see if any significant diff after they fixed it.
As you might know, many functions of 300D are being locked. Now the latest hack firmware can released a few of them, like RAW file size...etc..
I have been using the 300D for a few weeks now - however, the photos seem to be so dark!!! even with the flash on. If does not matter where I take the pix, indoors or outdoors, they are just dark!
Which mode are you using? Is it possible to send a sample picture (full size one) to Adrian媽媽's email address? Let's find out what's the problem. Thanks!